HP 4X - DDR InfiniBand Mezzanine HCA User Manual

Troubleshooting 58
NOTE: For the location of server LEDs and information on their statuses, refer to the server
documentation.
Possible causes:
• Improperly seated or faulty power supply
• Loose or faulty power cord
• Power source problem
• Power on circuit problem
• Improperly seated component or interlock problem
• Faulty internal component
Item See
1
Server maintenance and service guide, located on the Easy Set-up CD
or the HP website (http://www.hp.com/products/servers/platforms
)
2 "General diagnosis flowchart (on page 55)"
3 "Loose connections (on page 52)"
4 "Power source problems (on page 65)"
5
•
"Power supply problems (on page 65)"
•
Server maintenance and service guide, located on the Easy Set-up
CD or the HP website
(http://www.hp.com/products/servers/platforms
)
6 "System open circuits and short circuits (on page 75)"

HP 4X - DDR InfiniBand Mezzanine HCA Specifications

General

Brand	HP
Model	4X - DDR InfiniBand Mezzanine HCA
Category	Server
Language	English