112
4 Summary of the HP/Phoenix BIOS
HP/Phoenix BIOS (BIOS version: GJ.07.xx)
Tests of Flexible Disk Drive A
Flexible Disk Controller
Subsystem Test
Tests for proper operation of the flexible disk controller. Test failure
causes an error code to display.
Coprocessor Tests
Internal Numeric
Coprocessor Test
Checks for proper operation of the numeric coprocessor part of the
processor. Test failure causes an error code to display.
Parallel Port Tests
Parallel Port Test
Tests the integrated parallel port registers, as well as any other parallel
ports. Test failure causes an error code to display.
Serial Port Tests
Serial Port Test
Tests the integrated serial port registers, as well as any other serial ports.
Test failure causes an error code to display.
Hard Disk Drive Tests
Hard Disk Controller
Subsystem Test
Tests for proper operation of the hard disk controller. Test failure causes
an error code to display. The test does not detect hard disk replacement
or changes in the size of the hard disk.
System Configuration Tests
System Generation
Initiation of the system generation (SYSGEN) process, which compares
the configuration information stored in the CMOS memory with the actual
system. If a discrepancy is found, an error code will be displayed.
Plug and Play
Configuration
Configures any Plug and Play device detected (either PCI or ISA):
❒ All PCI devices and any ISA device necessary for loading the operating
system will be configured for use.
❒ Any ISA device that is not required for loading the operating system
will be initialized (prepared for loading of a device driver), but not fully
configured for use.
To Next Page
Loading...
Need help?
General