Processor
NOTE: All processor spare part kits include thermal paste.
Description Spare part number
Intel Core Solo T1400 1.83-GHz processor 448326-001
Intel Core Solo T1300 1.66-GHz processor 448325-001
Intel Core Duo T2300E 1.66-GHz processor 448324-001
Intel Core Duo T2300 1.66-GHz processor 448323-001
Intel Celeron M 420 1.60-GHz processor 448322-001
Intel Celeron M 410 1.46-GHz processor 448321-001
Before removing the processor, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet and
then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Battery on page 32).
5.
Remove the following components:
a.
Hard drive (see
Hard drive on page 33)
b.
Memory/WLAN module compartment cover (see
Memory module on page 35)
c.
Optical drive (see
Optical drive on page 39)
d.
Switch cover (see
Switch cover on page 41)
e.
Keyboard (see
Keyboard on page 43)
f.
Display assembly (see
Display assembly on page 47)
g.
Base enclosure (see
Base enclosure on page 52)
h.
Fan assembly (see
Fan assembly on page 55)
i.
Heat sink (see
Heat sink on page 57)
Remove the processor:
1. Use a flat-bladed screwdriver to turn the processor locking screw (1) one-half turn counterclockwise
until you hear a click.
Component replacement procedures 59
To Next Page
Loading...
Need help?
General
