Command Query Query Returns
n/a
:PRINt? [enhancement]
[enhancement] ::= [HIRes[,PARallel[,PCLcolor]]]
HIRes ::= contains both half-bright and
full-bright display information.
PARallel ::= print output from parallel port.
PCLcolor ::= basic color output using CMY driver
<print data>
*RCL <value>
<value> ::= {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12
| 13 | 14 | 15 | 16 }
n/a n/a
*RST
n/a n/a
:RUN
n/a n/a
:RUNSingle
n/a n/a
*SAV <value>
<value> ::= {1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | 11 | 12
| 13 | 14 | 15 | 16 }
n/a n/a
*SRE <mask>
<mask> ::= values defined in table below:
Bit Weight Enables
7128Not Used
6 64 RQS - Request Service
5 32 ESB - Event Status Bit
4 16 MAV - Message Available
3 8 Not used
2 4 Not used
1 2 Not used
0 1 Not used
*SRE? <mask> <new line>
<mask> ::= {0,..,255} (16-bit integer in NR1 format)
n/a
:STATus? <source>
<source> ::= {LCHANnel0,..,LCHANnel15 |
PMEMory1 | PMEMory2}
<value> <new line>
<value> ::= {ON | OFF}
n/a
*STB?
<value> <new line>
<value> ::= values defined in table below
Bit Weight Name Condition
7 128 ----
664RQS/MS
532ESB
416MAV
3 8 ----
2 4 ----
1 2 ----
0 1 ----
:STOP
n/a n/a
:SYSTem:DSP <normal ascii text>
<normal ascii text> ::= quoted message string
n/a n/a
n/a
:SYSTem:ERRor?
<value> <new line>
<value> ::= 16-bit integer in NR1 format
:SYSTem:KEY <value>
<value> ::= 16-bit integer in NR1 format
:SYSTem:KEY? <keycode><new line>
<keycode> ::= 16-bit integer in NR1 format.
:SYSTem:LOCK <value>
<value> ::= {ON | OFF}
:SYSTem:LOCK? <value> <new line>
<value> ::= {ON | OFF}
:SYSTem:SETup <setup>
<setup> ::= #800000500 <setup data string>
<setup data string> ::= binary block data
:SYSTem:SETup? <setup> <new line>
<setup> ::= #800000500 <setup data string>
<setup data string> ::= binary block data
Programmer’s Quick Reference
Commands and Queries
84