HP 54620A - Page 85

Command Query Query Returns
n/a
:TER?
<value> <new line>
<value> ::= {1 | 0} <16-bit integer in NR1 format>
(0 = no trigger; 1 = trigger occurred)
TIMebase:DELay <delay value>
<delay value> ::= floating point number [suffix]
[suffix] ::= {S | MS (-3) | US (-6) | NS (-9) |
PS (-12)}
:TIMebase:DELay? <value><new line>
<value> ::= floating point number in NR3 format
TIMebase:MODE <value>
<value> ::= {NORMal | DELayed}
:TIMebase:MODE? <value> <new line>
<value> ::= {NORMal | DELayed}
:TIMebase:RANGe <range value> [suffix]
<range value> ::= 50 ns to 50 s in NR3 format
[suffix] ::= { S | MS (-3) | US (-6) | NS (-9) |
PS (-12)}
:TIMebase:RANGe? <range value> <new line>
<range value> ::= 50 ns to 50 s (floating point
number in NR3 format)
:TIMebase:REFerence <value>
<value> ::= {LEFT | CENTer | RIGHt}
:TIMebase:REFerence? <value> <new line>
<value> ::= {LEFT | CENTer | RIGHt}
n/a
:TIMebase:SETup?
<current time base setup> ::= TIMebase:MODE
<mode>; RANGe <range value>; DELay <delay>;
REFerence <reference>; VERNier <vernier>
<new line>
<mode> ::= {NORMal | DELayed}
<delay> ::= time from trigger to delay reference
in seconds NR3 format
<range value> ::= 50 ns to 50 s in NR3 format
<reference> ::= {LEFT | CENTer | RIGHt}
<vernier> ::= {ON | OFF}
:TIMebase:VERNier <value>
<value>:::= {ON | OFF}
:TIMebase:VERNier? <value> <new line>
<value> ::= {ON | OFF}
:TRIGger:ADVanced:DURation <duration>
[suffix]
<duration> ::= 32-bit floating point number
(16 ns - 8,388.60 seconds) in NR3 format
[suffix] ::= {S | MS (-3) | US (-6) | NS (-9) | or
PS (-12)}
:TRIGger:ADVanced:DURation? <duration> <new line>
<duration> ::= 32-bit floating point number in
NR3 format
:TRIGger:ADVanced:EDGE1 <rising value>,
<falling value>
<rising value> ::= 32-bit integer in NR1 format
or <string>
<falling value> ::= 32-bit integer in NR1 format
or <string>
<string> ::= 0xnnnnn
n ::= {0 | 1 | 2 | 4 | 8}
:TRIGger:ADVanced:EDGE1? <rising value>, <falling value> <new line>
<rising value> ::= 32-bit integer in NR1 format
<falling value> ::= 32-bit integer in NR1 format
:TRIGger:ADVanced:EDGE2 <rising value> ,
<falling value>
<rising value> ::= 32-bit integer in NR1 format
or <string>
<falling value> ::= 32-bit integer in NR1 format
or <string>
<string> ::= 0xnnnnn
n ::= {0 | 1 | 2 | .... 8 | 9 | A | B | C | D | E | F}
:TRIGger:ADVanced:EDGE2? <rising value>, <falling value> <new line>
<rising value> ::= 32-bit integer in NR1 format
<falling value> ::= 32-bit integer in NR1 format
:TRIGger:ADVanced:OCCurrence <occurrence>
<occurrence> ::= 32-bit integer in NR1 format or
<string>
<string> ::= 0xnnnnn
n ::= {0 | 1 | 2 | .... 8 | 9 | A | B | C | D | E | F}
:TRIGger:ADVanced OCCurrence? <occurrence> <new line>
<occurrence> ::= 32-bit integer in NR1 format
Programmer’s Quick Reference
Commands and Queries
85