HP 5500 series User Manual

A–2 www.hp.com Reference Guide
Troubleshooting
Monitor may have been
moved or inadvertently
bumped.
Press the SELECT
button to access the
On-Screen Display.
Select Degauss to
activate.
Hewlett-Packard
suggests you not
degauss more than
once within a
30-minute period of
time.
Image is too large or
too small.
Horizontal width may need
adjustment.
Press the SELECT
button to access the
On-Screen Display.
Select H. Size to
adjust as needed.
Vertical height may need
adjustment.
Press the SELECT
button to access the
On-Screen Display.
Select V. Size to
adjust as needed.
Image is not centered. Horizontal position may need
adjustment.
Press the SELECT
button to access the
On-Screen Display.
Select H. Position to
adjust as needed.
Vertical position may need
adjustment.
Press the SELECT
button to access the
On-Screen Display.
Select V. Position to
adjust as needed.
Problem Possible Cause Solution

HP 5500 series Specifications

General

Brightness	250 cd/m²
Aspect Ratio	16:9
Refresh Rate	60 Hz
Power Consumption	25W (typical)
Panel Type	TN
Resolution	1920 x 1080
Contrast Ratio	1000:1
Response Time	5 ms
Input Ports	VGA
Color Support	16.7 million
VESA Mount	100 x 100 mm