HP 900 Series User Manual

Power Supply
Preliminary Requirements
1. Turn the unit off.
2. Remove the power cord.
Procedures
1. Unscrew the two captive thumbscrews holding the power supply access cover in place.
Refer
to Figure 2-5.
WARNING
A shock hazard exists on the power supply until about one minute after
the unit is turned off. Use caution in handling the power supply.
Figure 2-5. Power Supply Access Cover Screws
2. Remove the power supply access cover.
3. Remove the power supply grounding tab screw. Refer to Figure 2-6.
Figure 2-6. Power Supply Grounding Tab Screw
Assembly Replacement 39

HP 900 Series Specifications

General

Brand	HP
Model	900 Series
Category	Desktop
Language	English