HP 900 Series - Figure 2-16 A. Computer Motherboard Fasteners

Procedure
1. Remove the LED and both fan wire connectors from the motherboard.
2. Remove the screws holding the motherboard to the fan housing, and remove it. Refer to
Figure 2-16a, -H3b, or -16c, depending on the unit.
3. To install the motherboard, reverse steps 1 and 2.
Removal Screws *
Figure 2-16a. Computer Motherboard Screws
Figure 2-16b. HP 98568A
Opt. 132 Expander Motherboard Screws
Assembly Replacement
49