HP 9800 SERIES - 9895 A Rear Panel; Rom;Driver and HP-IB Interface Guide

General Information 1-13
1000 - M.E.F.
8. Install the DVA 32 Driver ROM and the 12992H Loader ROM in the mainframe.
9. Plug the 12821A Interface into the mainframe, then plug one end of the 59310-60002
cable into the interface, and the other end into the socket on the rear panel of the
9895A.
If connecting a slave unit, use the 9895-61606 cable to connect the slave to the
master (see Figure
1-5).
10. Turn the mainframe and all peripherals on. All peripherals connected to a mainframe
should
be connected for the system to operate properly.
Table 1-4. ROM/Driver and HP-IB Interface Guide
HP System
9835A/B
9845B/C
HP 1000-10
HP 1000-20, 40,
45
HP300, 3000
HP-IB Connector
ROM/Driver
Interface
98034A
98034A
12009A
12821A
98331B
98413A
00.30
OVA 32
None Needed
General Interface Controller
Line Frequency
Figure 1-5. 9895A Rear Panel