HP 9800 SERIES Service Manual

ATN
IPOl~DDRSI
Primary
Listen
Status:
ATN
PllOOOOO
I Secondary I
Requirements for Execution:
Parallel Poll:
HP 9895A Disc Memory Command Set A-47
Receive Data
P
P
D
- Data Bytes --.
No errors.
Sl - a
Stat 2 - Unchanged
DSJ -0
Unsuccessful.
Sl - Error
EOI
P
P
E
Stat 2 - Bits A, E and C set, if appropriate.
DSJ -1
See Buffered Write requirement.
ATN
I POll 11 11 I
Unlisten
The parallel poll response is re-enabled after the operation
is completed, normally or abnormally.

HP 9800 SERIES Specifications

General

Category	Storage
Series	9800 SERIES
Type	Disk Array
Drive Types Supported	SAS, SSD
RAID Levels Supported	0, 1, 5, 6, 10
Host Connectivity	Fibre Channel, iSCSI, SAS
Redundancy	Redundant power supplies and fans