5.1.1 Swap or Pagefile Space
The system must have adequate swap space (on Tru64 UNIX) or pagefile space (on
OpenVMS) for proper Q-Vet operation. You can set this up either before or after Q-Vet
installation.
If during initialization Q-Vet determines that the system does not have enough
swap/pagefile space, it will display a message indicating the minimum amount needed.
If you wish to address the swap/pagefile size before running Q-Vet, see the swap/pagefile
estimates on the Q-Vet web site.
Verify with Q-Vet 5-3
To Next Page
Loading...
