utilities into the RAMdisk, running I/O hardware
inventory, and prompting the you to select a
deployment task.
linux-setup.sh This script launches Linux installation by creating
and formatting disk partitions, specifying the Linux
Setup boot option, and rebooting the server.
rhel-setup.sh This script edits the configuration in the RHEL
unattended configuration file and copies the RHEL
boot image files to the ESP partition.
sles-setup.sh This script edits the configuration in the SLES
unattended configuration file, and copies the SLES
boot image files to the ESP partition.
• The utilities directory contains the following files:
cfggen The RAID configuration utility for LSI controllers;
it is a counterpart of cpqacuxe. In SSTK it is used
for applying RAID 1 in LSI 1068 controllers.
efivar A generic tool used to set EFI variables from the
SSTK LinuxPE.
getuuid This utility retrieves the Universally Unique ID
(UUID) used to identify a storage device or a single
partition.
hplpcfg The HP Emulex HBA configuration utility.
hpqlarep The HP QLogic HBA configuration utility.
hpshowdisk This utility gathers storage device information such
as disk size, device node, controller type and target
LUN including HBA WWID, and the target port
WWN for disks in a SAN environment.
allboards.xml
Used by the hwquery and ifhw utilities to convert PCI device IDs found in hardware
discovery into device names.
conrep
The configuration replication utility, which reads EFI variables from the model server
and records them in the conrep.dat file.
conrep.xml
A utility that includes a list of EFI variables, which determine what data to retrieve from
the server. You can edit this file to control the data collection.
cpqacuxe
The array configuration utility, which operates in two modes. In the capture mode, it
reads the configuration of a storage array controller and records it in a configuration
file. In the input mode, it writes the configuration to the target server. This archive is
extracted to /sbin/cpqacuxe and a structure under /opt/compaq/cpqacuxe.
efibootmgr
The EFI boot manager utility, which loads EFI applications (such as the OS boot loader)
and EFI drivers. The EFI boot manager allows you to control the server's boot environment
using variables stored in NVRAM.
hpacucli
The HP Array Configuration Utility Command Line Interface (HP ACU-CLI) is a
command-line based disk configuration tool that can be used to configure and manage
Smart Array Controllers and RAID Array Controllers in Integrity Linux environments.
Unpacking the Toolkit 31
To Next Page
Loading...
Need help?
General