HP BL860c Deployment Guide

6 Utilities Reference
This chapter contains reference information and usage examples for the utilities provided in the
toolkit. In other words, the manpages associated with SSTK. You can get online help for each
utility by using the -h or -? option.
This chapter contains the following manpages:
• “cfggen” (page 47)
• “CLMChecking” (page 49)
• “conrep” (page 50)
• “cpqacuxe” (page 52)
• “efibootmgr” (page 66)
• “efivar” (page 68)
• “Description” (page 69)getuuid
• “hpacucli” (page 69)
• “hpia64info” (page 70)
• “hplpcfg” (page 71)
• “hpqlarep” (page 71)
• “hpshowdisk” (page 73)
• “hwdisc” (page 74)
• “hwquery” (page 76)
• “ifhw” (page 77)
• “parted” (page 79)
cfggen
Synopsis
cfggen <controller #> <command> <parameters> ...
Description
Linux RAID configuration utility for LSI controllers; it is a counterpart of cpqacuxe. In SSTK,
it is used for applying RAID 1 in LSI 1068 controllers.
The <controller #> is a number between 0 and 255.
Table 6-1 cfggen Commands
DescriptionCommands
Create an IR volume without specifying drives.
AUTO
Create an IR volume.
CREATE
Set controller configuration to factory defaults.
DELETE
Display controller, volume and physical device information.
DISPLAY
Enable the IR capability of the controller.
ENABLEIR
Disable the IR capability of the controller.
DISABLEIR
Perform a low-level format of a SCSI hard disk drive.
FORMAT
Make drive a hot spare.
HOTSPARE
Lists all available LSI adapters. This command does not require <controller #>.LIST
cfggen 47

HP BL860c Specifications

General

Brand	HP
Model	BL860c
Category	Software
Language	English