HP BL860c Deployment Guide

Table 6-8 Error Codes (continued)
ReasonErrorCode
One or more controllers is locked by another machine or user.
Controller is locked by another
machine or user
278-282,
2564
There was a problem saving one or more controller
configurations.
Error saving Controller
268
This error is the “invalid increase/decrease” in logical drive
offset error. This can happen when too many unsaved
Too many coinciding expansion,
migration, or extension
operations
1065-1066
expansions, extensions, or migrations are tried at the same
time.
The controller does not support license key entry or deletion.
Controller does not support
license keys
1110
The controller requires physical drives for license keys.
Controller requires physical
drives to set license keys
1093
The controller requires non-failed physical drives for license
keys.
Controller requires non-failed
physical drives to set license
keys
1114
The entered license key is not a valid license key.
Invalid license key
1111
The controller already has the maximum number of license
keys installed.
Controller has maximum number of
license keys
1112
The entered license key is not a controller feature license key.
License key is not a controller
feature license key
1110
The controller does not support Raid Array ID.
Controller does not support Raid
Array ID
2850
The entered Raid Array ID is invalid. The Raid Array ID can
only consist of the following characters: a-z A-Z 0-9 ! @ # * (
Invalid Raid Array ID
2851
) , - _ + : . / [space]. It cannot end with a space character or
exceed the maximum number of characters allowed by the
controller.
The controller does not support SSP.
Controller does not support SSP
1091
The Controller does not support Logical Drive SSP states.
Use SSPState controller command to set the Controller SSP
state.
Controller does not support
Logical Drive SSP states. Use
'SSPState' Controller command to
set the Controller SSP state
2855
Controller does not support Controller SSP state. Use
LogicalDriveSSPState logical drive command to set SSP
states for each Logical Drive.
Controller does not support
Controller SSP state. Use
'LogicalDriveSSPState' Logical
2856
Drive command to set SSP states
for each Logical Drive
The SSP settings cannot be changed for the controller or
logical drive.
Cannot change SSP settings
2853
The adapter ID is not a valid adapter ID that was detected
by the controller.
Invalid SSP Adapter ID
2854
The requested SSP State is not a valid SSP state.
Invalid SSP State
2852
The controller does not support the snapshot resource volume
feature.
Controller does not support
snapshot resource volume feature
2858
The specified Resource Volume Owner is not valid. The
Resource Volume Owner should be a valid existing logical
drive ID.
Invalid Resource Volume Owner
2859
cpqacuxe 65

HP BL860c Specifications

General

Brand	HP
Model	BL860c
Category	Software
Language	English