12
Replacing the System Board
Removing the System Board
Removing the System Board
You will need:
• to have removed the cover. Refer to “Removing the Cover” on page 8.
• to have a Torx T-15 or a slotted screw driver.
The Procedure
1 Remove the two screws ➊.
Warning
If your old system board contains a lithium battery, do not dispose of it in
household waste. Please return batteries to the shop from which you bought
them, to the dealer from whom you purchased your PC, or to HP, so they can be
recycled or disposed of in a sound way. Returned used batteries will be
accepted free of charge.
Caution
For your safety, disconnect the power cord and all external cables.
To Next Page
Loading...
