18
Replacing the Floppy Drive
Removing the Floppy Drive
Removing the Floppy Drive
You will need to have removed the cover. Refer to “Removing the Cover” on page 8.
1 Undo the floppy drive bay fixing screw.
2 Pull the bay towards the back of the computer until it is released from its
mountings.
3 Undo the four screws ➊, two on each side.
4 Remove the two cables form the back of the drive.
5 Slide the drive out of the bay.
Caution
For your safety, disconnect the power cord and all external cables.
To Next Page
Loading...
