HP Chromebook 11A G6 Education Edition - Touchpad

TouchPad
NOTE: The TouchPad spare part kit does not include the TouchPad cable. The TouchPad cable is included in
the Cable Kit, spare part number L14906-001, and includes double-sided adhesive.
Table 5-2 TouchPad description and part number
Description Spare part number
TouchPad L51914-001
Before removing the TouchPad, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the keyboard/top cover (see Keyboard/top cover on page 23).
Remove the TouchPad:
1. Disconnect the cable from the TouchPad ZIF connector (TouchPad cable on page 26).
2. Release the shielding material (1) that covers the top edge of the TouchPad.
3. Remove the three Phillips M2.0 × 2.5 screws (2) that secure the TouchPad and TouchPad bracket to the
keyboard/top cover.
4. Remove the three Phillips M2.0 × 2.0 broadhead screws (3) that secure the TouchPad to the
keyboard/top cover.
5. Remove the TouchPad bracket (4).
The TouchPad bracket is available using spare part number L18300-001.
6. Remove the TouchPad (5).
Reverse this procedure to install the TouchPad.
Component replacement procedures 27