Speakers
Table 5-5 Speaker description and part number
Description Spare part number
Speaker (include cables) L14920-001
Before removing the speakers, follow these steps:
1. Prepare the computer for disassembly (Preparation for disassembly on page 22).
2. Remove the keyboard/top cover (see Keyboard/top cover on page 23).
3. Disconnect the battery cable from the system board (see Battery on page 28).
Remove the speakers:
1. If a protective tab covers the connector, lift the tab.
2. Disconnect the speaker cable (1) from the system board.
3. Release the speaker cable (2) from the retention channel/retention clips built into the bottom cover.
4. Remove the two Phillips M2.0 × 3.5 screws (3) that secure the speakers to the bottom cover.
5. Remove the speakers (4).
Reverse this procedure to install the speakers.
32 Chapter 5 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
