a. Turn the computer right side up with the rear toward you.
b. Open the computer as far as it will open.
c. Release the top edge of the display bezel (1) from the display assembly.
d. Release the left and right edges of the display bezel (2) from the display assembly.
e. Release the bottom edge of the display bezel (3) from the display assembly.
f. Remove the display bezel (4).
The display bezel is available using spare part number L89773-001.
3. Remove the display bracket by following these steps:
a. Remove the two Phillips M2.0×2.9 screws (1) that secure the display bracket to the display
back cover.
Component replacement procedures 45
To Next Page
Loading...
