HP Color LaserJet CM2320 - Multifunction Printer - Page 273

Control panel message Event log error message Description Recommended action
power and wait for the product to
initialize.
If the error persists, replace the
DC controller.
If the error persists, replace the
product.
54.15 Error
Turn off then on
54.1500 The product has experienced a
yellow toner level sensor error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, verify that the
cables between the DC
controller, print-cartridge tray,
and color misregistration sensor
are firmly connected.
If the error persists, replace the
color misregistration sensor.
If the error persists, replace the
DC controller.
54.16 Error
Turn off then on
54.1600 The product has experienced a
magenta toner level sensor error.
1. Turn off the power by using
the power switch, and then
wait at least 30 seconds.
2. Turn on the power and wait
for the product to initialize.
If the error persists, verify that the
cables between the DC
controller, print-cartridge tray,
and color misregistration sensor
are firmly connected.
If the error persists, replace the
color misregistration sensor.
If the error persists, replace the
DC controller.
54.17 Error
Turn off then on
54.1700 The product has experienced a
cyan toner level sensor error.
If the error persists, verify that the
cables between the DC
controller, print-cartridge tray,
and color misregistration sensor
are firmly connected.
If the error persists, replace the
color misregistration sensor.
If the error persists, replace the
DC controller.
Table 7-12 Control-panel messages (continued)
ENWW Control-panel messages 261