HP Compaq d330 DT Hardware Reference Guide

2–4 www.hp.com Hardware Reference Guide
Hardware Upgrades
Removing the Computer Cover
To remove the computer cover:
1. If you have locked the Smart Cover Lock, use Computer Setup to
unlock the lock. For more information about Computer Setup,
refer to the Computer Setup (F10) Utility Guide on the
Documentation Library CD.
2. Turn off the computer properly through the operating system and
turn off any external devices.
3. Disconnect the power cord from the power outlet, and disconnect
any external devices.
Ä
CAUTION: Before removing the computer cover, ensure that the
computer is turned off and that the power cord is disconnected from the
electrical outlet.
4. Loosen the two captive thumbscrews that secure the cover to the
computer chassis 1.
5. Slide the cover back about 1 inch (2.5 cm), then lift it up and off
the unit 2.
Removing the Computer Cover

HP Compaq d330 DT Specifications

General

Brand	HP
Model	Compaq d330 DT
Category	Desktop
Language	English