Getting Started
Getting Started www.hp.com 15
3. With the top of the drive facing left (or up, when the
computer is in the desktop position) and the drive connector
facing the computer, slide the drive into the MultiBay and
push firmly to ensure that the electrical connector is properly
seated.
Inserting a Drive into the MultiBay (shown with USDT in tower
configuration)
4. After inserting an optical drive while the computer is turned
on, restart the computer to ensure the optical drive functions
correctly if it uses recording, backup, or video playback
software applications.
✎
If you are using an operating system other than Microsoft
Windows XP, you must install an audio cable to use the sound
feature of the drive.
5. Engage the MultiBay security catch, if desired. Refer to
“Engaging and Releasing the MultiBay Security Catch” on
page 8 for more information.
To Next Page
Loading...
