EasyManuals Logo

HP Compaq dc7100 DT Getting Started Guide

HP Compaq dc7100 DT
46 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Getting Started
Getting Started www.hp.com 33
Interpreting Diagnostic Lights and Audible
Codes
This section covers the front panel LED codes as well as the
audible codes that may occur before or during POST that do not
necessarily have an error code or text message associated with
them.
If you see flashing LEDs on a PS/2 keyboard, look for flashing
LEDs on the front panel of the computer and refer to the
following table to determine the front panel LED codes.
Recommended actions in the following table are listed in the
order in which they should be performed.
Diagnostic Front Panel LEDs and Audible Codes
Activity Beeps Possible Cause
Recommended
Action
Green Power LED
On.
None Computer on. None
Green Power LED
flashes every two
seconds.
None Computer in
Suspend to RAM
mode (select models
only) or normal
Suspend mode.
None required. Press
any key or move the
mouse to wake the
computer.

Other manuals for HP Compaq dc7100 DT

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq dc7100 DT and is the answer not in the manual?

HP Compaq dc7100 DT Specifications

General IconGeneral
Processor SpeedUp to 3.8 GHz
ChipsetIntel 915G
MemoryUp to 4 GB DDR2 SDRAM
Operating SystemWindows XP Professional
Form FactorDesktop
ProcessorIntel Pentium 4
Storage40 GB to 160 GB SATA
GraphicsATI Radeon X300 SE
Optical DriveDVD-ROM
AudioIntegrated audio
NetworkIntegrated Gigabit Ethernet
Expansion Slots1 PCI Express x16
Ports1 Parallel, 1 Serial, 2 PS/2, 1 VGA

Related product manuals