HP Compaq dc7100 DT Getting Started Guide

16 www.hp.com Getting Started
Getting Started
If the device does not start, ensure that the necessary device
drivers are installed on the system. If they are not available, they
may be downloaded, at no cost, from the HP Web site at
www.hp.com. Click support & drivers, select Download
drivers and software, enter the model number of the computer,
and press
Enter.
Partitioning and Formatting a MultiBay
Hard Drive
✎
You must be logged on as an administrator or a member of the
Administrators group in order to complete this procedure.
1. Exit all software applications, shut down the operating
system software, and turn off the computer.
2. Insert the hard drive into the MultiBay. Refer to “Inserting a
Drive into the MultiBay” on page 14 for more information.
3. Turn on the computer.
4. Click Start.
5. Right-click My Computer, then click Manage.
6. Click Storage, then double-click Disk Management.
7. Right-click the MultiBay hard drive, then click Partition.
Carefully read and respond to any prompts that appear on the
screen.
Refer to the online Help (click Action > Help) for additional
information.

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA