HP Compaq dc7100 DT Getting Started Guide

Getting Started
Getting Started www.hp.com 29
System does not
power on and the
LEDs on the front of
the computer are not
flashing. (continued)
OR
Press and hold the power button
for less than 4 seconds. If the
hard drive LED does not turn on
green then:
1. Check that the unit is
plugged into a working AC
outlet.
2. Open hood and check that
the power button harness is
properly connected to the
system board.
3. Check that both power
supply cables are properly
connected to the system
board.
4. Check to see if the 5 V_aux
light on the system board is
turned on. If it is turned on,
then replace the power
button harness.
5. If the 5 V_aux light on the
system board is not turned
on, then replace the power
supply.
6. Replace the system board.
Solving General Problems (Continued)
Problem Cause Solution

HP Compaq dc7100 DT Specifications

General

Processor Speed	Up to 3.8 GHz
Chipset	Intel 915G
Memory	Up to 4 GB DDR2 SDRAM
Operating System	Windows XP Professional
Form Factor	Desktop
Processor	Intel Pentium 4
Storage	40 GB to 160 GB SATA
Graphics	ATI Radeon X300 SE
Optical Drive	DVD-ROM
Audio	Integrated audio
Network	Integrated Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	1 Parallel, 1 Serial, 2 PS/2, 1 VGA