EasyManuals Logo

HP Compaq dc7100 SFF User Manual

HP Compaq dc7100 SFF
212 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #138 background imageLoading...
Page #138 background image
7-6 361834-001 Technical Reference Guide
Power and Signal Distribution
The wake up sequence for each event occurs as follows:
Wake-On-LAN
The network interface controller (NIC) can be configured for detection of a “Magic Packet” and
wake the system up from sleep mode through the assertion of the PME- signal on the PCI bus.
Refer to Chapter 5, “Network Support” for more information.
Modem Ring
A ring condition on a serial port can be detected by the power control logic and, if so configured,
cause the PS On signal to be asserted.
Power Management Event
A power management event that asserts the PME- signal on the PCI bus can be enabled to cause
the power control logic to generate the PS On. Note that the PCI card must be PCI ver. 2.2
compliant to support this function.

Table of Contents

Other manuals for HP Compaq dc7100 SFF

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Compaq dc7100 SFF and is the answer not in the manual?

HP Compaq dc7100 SFF Specifications

General IconGeneral
Processor SpeedUp to 3.8 GHz
GraphicsIntegrated Intel Graphics Media Accelerator 900
AudioIntegrated AC'97 audio
Form FactorSmall Form Factor (SFF)
Power Supply240W
ProcessorIntel Pentium 4
ChipsetIntel 915G Express
MemoryUp to 4 GB DDR
Storage40 GB to 160 GB HDD
Optical DriveCD-ROM or DVD-ROM
NetworkIntegrated Intel Gigabit Ethernet
Expansion Slots1 PCI Express x16
PortsUSB 2.0, serial, parallel, VGA
Operating SystemWindows XP Professional

Related product manuals