HP Compaq dc7100 SFF User Manual

2-16 361834-001 Technical Reference Guide
System Overview
Small Form Factor / Slim Tower Chassis
The chassis layouts for the Small Form Factor (SFF) used for the HP Compaq dc7100 models
and the Slim Tower (ST) used for the HP Comapq dx6100 models are shown in Figure 2-13.
Features include:
■ Tilting drive cage assembly for easy access to processor and memory sockets
■ Two configurations:
❏ Without card cage:
◆ Two half-height, full length PCI 2.3 slots
◆ One PCI Express x16 graphics/SDVO slot
◆ One PCI Express x1 slot
❏ With card cage:
◆ Two full-height, full-length PCI 2.3 slots
NOTE:
[1] Accepts PCI-E graphics or reversed-layout ADD2 card.
Figure 2-13. SFF / ST Chassis Layout, Top / Right Side Views
Item Description Item Description
1 Power supply assembly 6 Card cage
2 DIMM sockets (4) 7 Processor socket
3 PCI Express x1 slot 8 Chassis fan
4 PCI Express x16 graphics/reversed-layout SDVO slot [1] 9 Diskette drive bay
5 PCI 2.3 slots (2) 10 CD-ROM drive bay
Chassis without card cage
Chassis with card cage
1
2
3
4
5
6
7
8
-
9
1
2
8
9
-
7

HP Compaq dc7100 SFF Specifications

General

Processor Speed	Up to 3.8 GHz
Graphics	Integrated Intel Graphics Media Accelerator 900
Audio	Integrated AC'97 audio
Form Factor	Small Form Factor (SFF)
Power Supply	240W
Processor	Intel Pentium 4
Chipset	Intel 915G Express
Memory	Up to 4 GB DDR
Storage	40 GB to 160 GB HDD
Optical Drive	CD-ROM or DVD-ROM
Network	Integrated Intel Gigabit Ethernet
Expansion Slots	1 PCI Express x16
Ports	USB 2.0, serial, parallel, VGA
Operating System	Windows XP Professional