HP Compaq dc7800 Series User Manual

Technical Reference Guide www.hp.com 8-7
SYSTEM BIOS
8.5 SMBIOS
In support of the DMI specification, PnP functions 50h and 51h are used to retrieve the SMBIOS
data. Function 50h retrieves the number of structures, size of the largest structure, and SMBIOS
version. Function 51h retrieves a specific structure. This system supports SMBIOS version 2.4
and the structure types listed in the following table:
✎
System information on these systems is handled exclusively through the SMBIOS.
Table 8-3
System ID Numbers
Type Data
0 BIOS Information
1System Information
2 Base board information
3 System Enclosure or Chassis
4 Processor Information
7Cache Information
8 Port Connector Information
9System Slots
13 BIOS Language Information
15 System Event Log Information
16 Physical Memory Array
17 Memory Devices
19 Memory Array Mapped Addresses
20 Memory Device Mapped Addresses
31 Boot Integrity Service Entry Point
32 System Boot Information

HP Compaq dc7800 Series Specifications

General

Processor	Intel Core 2 Duo, Intel Pentium Dual-Core, Intel Celeron
Chipset	Intel Q35 Express
Memory	Up to 8 GB DDR2 SDRAM
Audio	Integrated High Definition Audio
Form Factor	Ultra-slim desktop, Small form factor, Convertible minitower
Storage	80GB to 500GB SATA HDD
Graphics	Integrated Intel Graphics Media Accelerator 3100
Optical Drive	DVD-ROM, DVD+/-RW
Network	Integrated Gigabit Network Connection
Ports	USB 2.0, VGA, serial, parallel, audio in/out
Operating System	Windows Vista, Windows XP, FreeDOS
Expansion Slots	1 low-profile PCI, 1 low-profile PCI Express x16
Power Supply	240W