Power
Software Guide 1–7
Default Power Procedures
Task Procedure Result
Turn the
tablet PC on
from shutdown
Slide and release the power
switch.
Power/standby light turns on.
Operating system loads.
Shut down the
tablet PC*
Save your work and close all
open applications, then
select Start > Turn off
Computer> Shut down.
Operating system closes.
Power/standby light turns off.
Ta bl et P C t ur n s of f.
Initiate Standby Slide and release the power
switch or select Start > Turn
off Computer > Standby.
(If the Standby option is not
displayed and an optional
keyboard is in the system,
press and hold shift.)
Power/standby light flashes.
Screen clears.
Resume from
Standby
Slide and release the power
switch.
Power/standby light turns on.
Your work returns to the
screen.
Initiate
Hibernation
Select Start > Turn off
Computer > Hibernate.
(If the Hibernate option is
not displayed and an
optional keyboard is in
the system, press and
hold shift.)
✎
If the tablet PC is in
Standby, you must
resume from
Standby before
you initiate
Hibernation.
Power/standby light turns off.
Screen clears.
Resume from
Hibernation
Slide and release the power
switch.
Power/standby light turns on.
Your work returns to the
screen.
*If the system is unresponsive and you are unable to shut down the tablet PC
with this procedure, see the following section, “Using Emergency Shutdown
Procedures.”
334243-001.book Page 7 Friday, August 15, 2003 10:22 AM