Software Updates and Restorations
Software Guide 3ā15
3. At the download area:
a. Write down the number or name of the software package,
so that you can identify it later when it has been
downloaded to your hard drive.
b. Follow the instructions on the site to download the
software package to your hard drive.
4. When the download is complete, select Start > All
Programs > Accessories > Windows Explorer >
My Computer > your hard drive (usually, Local Disk C:) >
Program Files > Widcomm > Bluetooth Software > bin.
5. Double-click the btdfuapp.exe file to open the Bluetooth
Device Firmware Upgrade dialog.
6. Select the Browse button, then select the folder where the
DFU (Device Firmware Upgrade) file was downloaded.
7. Select the DFU file, then select Open.
8. Select Start.
ā
The progress bar on the Bluetooth Device Firmware Upgrade
dialog box will advance as the flash process continues.
9. If you are prompted for a USB driver, point to the bin
directory under Program Files and follow the on-screen
instructions to load the driver.
10. After the DFU upload is completed, select OK to close the
notification window.
11. Select the Exit button to end the flash process and close all
windows.
334243-001.book Page 15 Friday, August 15, 2003 10:22 AM
To Next Page
Loading...
Need help?
General
