24
Quality
The Quality sets the quality (compression) at which the
image is captured. The quality determines the amount of
compression applied to your images. Fine quality would
give you the best images with sharper details and less
compression. However, the higher the quality, the more
memory space is required in your memory card.
EV Compensation
Images can be captured with the overall scene intentionally
made brighter or darker. These settings are used when a
suitable brightness (exposure) cannot otherwise be
obtained in circumstances where the difference in
brightness between the subject and the background (the
contrast) is large, or when the subject that you wish to
capture is very small within the scene. Available for still
images only.
• To adjust EV settings, press the or keys to
increase/decrease the value. As you adjust the
settings, the LCD monitor synchronously displays the
image applying the EV settings. Press the OK button
to save and apply changes.
Recording Videos
You can record videos with the camera, the available
recording time depends on the capacity of the memory
card. Videos can be recorded until the maximum memory
capacity has been reached. However the length of a
single video may be limited (the limitation depends on the
camera model).
1. Press the Movie button to start recording.
2. Focus your camera on the subject that you want to
take.
3. Use the Zoom lever to zoom in and zoom out an
image.
4. To pause recording, press the key
.
5. To continue recording, press the key
again.
6. To stop recording, press the Movie button.
• When the camera stop recording due to reaching maximum capacity (4GB) for a
single video, simply press the Movie button again to continue recording.
• The camera will automatically stop recording when the memory capacity is full.
• Digital zoom is not available while recording a video.
• Sound cannot be recorded while using zooms (Spinning the Zoom lever.)
• Power save is not available in video recording or pause recording.
Settings of Recording Videos
Press Function button to enable video setting menu before recording a video.
To Next Page
Loading...
Need help?
General
