34
To activate Blink Detection
1. Select Blink Detection Mode from Scene Mode
submenu.
2. Half press the Shutter button to focus the subject.
The frame turns green to indicate focus is set.
3. Press the Shutter button to capture the image
and automatically save the Image.
4. If the camera detects subject blinked eye, a "Save
image" or "Cancel" option appears on the screen.
5. Select Save image to save or Cancel to disregard.
Using Pre-composition Mode
When asking someone else to take images for you, but the images always don’t come up right?
Pre-composition helps you get the background you
want, even if you need to ask someone else to record
the image for you.
Basically, Pre-composition is a two-step process.
1. Compose the background you want and press the
Shutter button (full press), which causes 1/3 of
semi-transparent image of the background to remain
on the LCD monitor. Press Menu button to cancel the
semi-transparent temporarily image.
2. Ask someone else to record a shot of you against your
original pre-composed background, telling him/her to
compose the image by using the 1/3 semi-transparent
screen image as a guide.
3. Move your position until photographer confirm your
whole or half body in the frame and in the right place.
4. Press the Shutter button. Camera stores the image
produced by this step only.
To Next Page
Loading...
Need help?
General
