HP dc5750 - Microtower PC User Manual

Logging on for the first time
Before you begin, you must be logged on to Windows with an administrator account, but not logged on
to Credential Manager.
1. Open HP ProtectTools Security Manager by double-clicking the HP ProtectTools Security Manager
icon in the notification area. The HP ProtectTools Security Manager window opens.
2. In the left pane, click Credential Manager, and then click Log On in the upper-right corner of the
right pane. The Credential Manager Logon Wizard opens.
3. Type your Windows password in the Password box, and then click Next.
Registering credentials
You can use the “My Identity” page to register your various authentication methods, or credentials. After
they have been registered, you can use these methods to log on to Credential Manager.
Registering fingerprints
A fingerprint reader allows you to log on to Windows using your fingerprint for authentication instead of
using a Windows password.
ENWW Setup procedures 13

HP dc5750 - Microtower PC Specifications

General

Chipset	ATI Radeon Xpress 1150
Audio	Integrated High Definition Audio
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Memory	Up to 8 GB DDR2 SDRAM
Storage	SATA Hard Disk Drive
Optical Drive	DVD-ROM, DVD+/-RW
Graphics	Integrated ATI Radeon Xpress
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI
Ports	4 USB 2.0, 1 RJ-45, 1 VGA, Audio in/out, Serial, Parallel
Operating System	Windows XP, Windows Vista, FreeDOS
Weight	10 kg