HP dc5750 - Microtower PC User Manual

Enabling and disabling system configuration options
NOTE: Some of the items listed below may not be supported by your computer.
To enable or disable devices or security options:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click BIOS Configuration.
3. Type your Computer Setup administrator password at the BIOS administrator password prompt,
and then click OK.
4. In the left pane, click System Configuration, and then enable or disable a system configuration
option, or configure any of the following system configuration options in the right pane:
●
Port Options
◦
Serial Port
◦
Infrared Port
◦
Parallel Port
◦
SD Slot
◦
USB Port
◦
1394 Port
◦
Cardbus Slot
◦
ExpressCard slot
●
Boot Options
◦
F9, F10, and F12 Delay (Sec)
◦
MultiBoot
◦
Express Boot Popup Delay (Sec)
◦
CD-ROM Boot
◦
Floppy Boot
◦
Internal Network Adapter Boot
◦
Internal Network Adapter Boot Mode (PXE or RPL)
◦
Boot Order
●
Device Configurations
◦
NumLock at Boot
◦
Swapping fn/Ctrl Keys
◦
Multiple Pointing Devices
◦
USB Legacy Support
◦
Parallel port mode (standard, bidirectional, EPP, or ECP)
◦
Data Execution Prevention
44 Chapter 5 BIOS Configuration for HP ProtectTools ENWW

HP dc5750 - Microtower PC Specifications

General

Chipset	ATI Radeon Xpress 1150
Audio	Integrated High Definition Audio
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Memory	Up to 8 GB DDR2 SDRAM
Storage	SATA Hard Disk Drive
Optical Drive	DVD-ROM, DVD+/-RW
Graphics	Integrated ATI Radeon Xpress
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI
Ports	4 USB 2.0, 1 RJ-45, 1 VGA, Audio in/out, Serial, Parallel
Operating System	Windows XP, Windows Vista, FreeDOS
Weight	10 kg