HP dc5750 - Microtower PC User Manual

Advanced tasks
Managing HP ProtectTools add-on module settings
Some of the features of HP ProtectTools Security Manager can be managed in BIOS Configuration.
Enabling and disabling smart card power-on authentication support
Enabling this option allows you to use a smart card for user authentication when you turn on the
computer.
NOTE: To fully enable the power-on authentication feature, you must also configure a smart card using
the Java Card Security for HP ProtectTools module.
To enable smart card power-on authentication support:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click BIOS Configuration.
3. Type your Computer Setup administrator password at the BIOS administrator password prompt,
and then click OK.
4. In the left pane, click Security.
5. Under Smart Card Security, click Enable.
NOTE: To disable smart card power-on authentication, click Disable.
6. Click Apply, and then click OK in the HP ProtectTools window.
46 Chapter 5 BIOS Configuration for HP ProtectTools ENWW

HP dc5750 - Microtower PC Specifications

General

Chipset	ATI Radeon Xpress 1150
Audio	Integrated High Definition Audio
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Memory	Up to 8 GB DDR2 SDRAM
Storage	SATA Hard Disk Drive
Optical Drive	DVD-ROM, DVD+/-RW
Graphics	Integrated ATI Radeon Xpress
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI
Ports	4 USB 2.0, 1 RJ-45, 1 VGA, Audio in/out, Serial, Parallel
Operating System	Windows XP, Windows Vista, FreeDOS
Weight	10 kg