HP dc5750 - Microtower PC User Manual

Advanced tasks (administrator only)
The “Authentication and Credentials” page and the “Advanced Settings” page of Credential Manager
are available only to those users with administrator rights. From these pages, you can perform the
following tasks:
●
Specifying how users and administrators log on
●
Configuring custom authentication requirements
●
Configuring credential properties
●
Configuring Credential Manager settings
Specifying how users and administrators log on
On the “Authentication and Credentials” page, you can specify which type or combination of credentials
are required of either users or administrators.
To specify how users or administrators log on:
1. Select Start > All Programs > HP ProtectTools Security Manager.
2. In the left pane, click Credential Manager, and then click Authentication and Credentials.
3. In the right pane, click the Authentication tab.
4. Click the category (Users or Administrators) from the category list.
5. Click the type or combination of authentication methods from the list.
6. Click Apply, and then click OK.
ENWW Advanced tasks (administrator only) 23

HP dc5750 - Microtower PC Specifications

General

Chipset	ATI Radeon Xpress 1150
Audio	Integrated High Definition Audio
Networking	Integrated Broadcom NetXtreme Gigabit Ethernet
Power Supply	300W
Processor	AMD Athlon 64 X2, AMD Athlon 64, AMD Sempron
Memory	Up to 8 GB DDR2 SDRAM
Storage	SATA Hard Disk Drive
Optical Drive	DVD-ROM, DVD+/-RW
Graphics	Integrated ATI Radeon Xpress
Expansion Slots	1 PCI Express x16, 1 PCI Express x1, 1 PCI
Ports	4 USB 2.0, 1 RJ-45, 1 VGA, Audio in/out, Serial, Parallel
Operating System	Windows XP, Windows Vista, FreeDOS
Weight	10 kg