5. Insert the edge of the paper into the printer.
WARNING! Do not push your ngers inside the printer's paper path.
6. Roll the paper into the printer until you feel resistance and the paper exes slightly. When the printer
detects the paper, it beeps, and feeds in the paper automatically.
7. The front panel prompts you to select the paper category and type.
8. If you do not see your paper type in the front panel, touch More paper types.
If you still cannot nd your paper type in the whole list, see The paper type is not in the driver
on page 122.
9. The printer checks the alignment and measures the width. If the roll is not correctly aligned, follow the
instructions on the front-panel display.
10. Close the roll cover.
11. Touch OK when ready.
38 Chapter 5 Paper handling ENWW
To Next Page
Loading...
