14. The front panel asks you to remove the syringe from the FI tower.
15. The front panel asks you to reinstall the printheads that you removed earlier.
16. The front panel asks you to close the Carriage Cover and the Window.
Service Station test
The purpose of this test is to check the operation of the Service Station.
1. In the Diagnostics menu, scroll to Service Station and press OK.
2. Within the Service Station submenu, select the Service Station test.
3. The front panel then prompts you to check the status of the printer.
4. Check that:
●
The window is closed.
●
The service station door is closed.
●
The media lever is lowered.
●
All printheads are inserted.
●
All cartridges are inserted.
5. Press OK to continue.
6. The printer performs a series of movements numbered from 1 to 10. It takes about 2 minutes to
perform all the movements.
ENWW
Entering the Service Tests menu
97
Service tests and
utilities
To Next Page
Loading...
