Center Guide
Removal
WARNING! Switch off the printer and remove the power cable.
1. Remove the Right Cover See Right Cover on page 216.
2. Remove the Left Cover
See Left Cover on page 222.
3. Remove the Primer Assembly
See Primer Assembly on page 247.
4. Remove the Right Connector Cover
See Right Connector Cover on page 238.
5. Remove:
●
For the 42-inch model, the Left Connector Cover
See Left Connector Cover (42-inch)
on page 240.
●
For the 60-inch model, the Electronics Module Extension
See Electronics Module Extension
(60-inch only) on page 241.
ENWW
Disassembly order
395
Removal and
installation
To Next Page
Loading...
