Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.7:01
Cause: Matte Black/Red Printhead in slot 7 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.8:01
Cause: Matte Black/Red Printhead in slot 8 is deteriorating
Solution: This may impact your print quality. If it becomes unacceptable in the future, replace that
printhead with a new one.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.1:02
Cause: Magenta/Yellow Printhead in slot 1 nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from
producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean
(Recover) Printhead procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.2:02
Cause: Magenta/Yellow Printhead in slot 2 nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from
producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean
(Recover) Printhead procedure.
NOTE: This system error appears only after the printhead is out of warranty.
SE 28.3:02
Cause: Light Cyan/Light Magenta Printhead in slot 3 nearing the end of its useful life
Solution: This printhead may have reached a degradation level that prevents the printer from
producing acceptable prints consistently. If it becomes unacceptable in the future, run the Clean
(Recover) Printhead procedure.
NOTE: This system error appears only after the printhead is out of warranty.
ENWW
Continuable and non-continuable error codes
53
System error codes
To Next Page
Loading...
