Using a SIM card (select products only)
Use these instructions to insert a SIM card.
IMPORTANT: You can damage the SIM card if you insert the wrong size card or insert it or the SIM
card tray in the wrong direction. The card might also become stuck in the slot. Do not use SIM card
adapters. To prevent damage to the SIM card or connectors, use minimal force when inserting or
removing a SIM card.
Determining the correct SIM card size for your computer
Before purchasing a SIM card, follow these instructions to determine the correct SIM card size for your
computer.
1. Go to http://www.hp.com/support, and then search for your computer by product name or number.
2. Select Product Information.
3. Refer to the listed options to determine which card to purchase.
Inserting a SIM card in the service bay
To insert a SIM card, follow these steps.
1. Turn off the computer by using the Shut down command.
2. Close the display.
3. Disconnect all external devices connected to the computer.
4. Unplug the power cord from the AC outlet.
5. Turn the computer upside down on a flat surface, with the battery bay toward you.
6. Remove the battery.
7. Insert the SIM card into the SIM card slot, and then press in on the SIM card until it is firmly seated.
NOTE: Your SIM card or the SIM card slot in your computer might look different from the
illustration in this section.
NOTE: Your SIM card slot might have an icon to show which way the card should be inserted into
the computer.
16
Chapter 2 Components
To Next Page
Loading...
