Table 5-4 Solid-state drive descriptions and part numbers
Description Spare part number
Primary solid-state drives (M.2 2280)
1 TB, PCIe, TLC M16560-001
512 GB, PCIe-4 × 4, TLC M17436-001
512 GB, PCIe-4 × 4, TLC, self-encrypting drive M52031-001
512 GB, PCIe, value L85364-001
256 GB, PCIe-4 × 4, TLC M52025-001
256 GB, PCIe-4 × 4, TLC, self-encrypting drive M52029-001
256 GB, PCIe, value L85354-001
Solid-state drive support kit N00354-001
Before removing the solid-state drive, follow these steps:
1. Prepare the computer for disassembly (see Preparation for disassembly on page 37).
2. Remove the bottom cover (see Bottom cover on page 37).
3. Disconnect the battery cable from the system board (see Battery on page 44).
Remove the solid-state drive:
1. Remove the Phillips M2.0 × 2.5 screw (1) that secures the drive to the computer.
2. Pull the drive away from the socket to remove it (2).
Primary M.2 2280 solid-state drive
42 Chapter 5 Removal and replacement procedures for Customer Self-Repair parts
To Next Page
Loading...
