● Speaker cable (3)
● Display cable (ZIF) (4)
● Touchpad cable (ZIF) (5)
● Keyboard backlight cable (ZIF) (select products only) (6)
● Keyboard cable (reverse ZIF) (7)
● Fingerprint reader cable (ZIF) (select products only) (8)
●
Important: Do not disconnect the RTC battery cable (9)
● Speaker cable (10)
2. Remove the eight Phillips M2.0 × 4.0 screws (1) that secure the system board to the computer.
3. Remove the USB bracket from the left side of the system board (not shown).
4. Remove the RJ-45 (network) door from the system board (2).
54 Chapter 6 Removal and replacement procedures for authorized service provider parts
To Next Page
Loading...
