12. If it is necessary to replace the WLAN antennas and:
a. Remove the WLAN antennas (1) from the display enclosure. The antennas are attached to
the display enclosure with tape.
b. Remove the WLAN (2) from the display enclosure. The are attached to the display
enclosure with tape.
c. Remove the WLAN antennas and (3) from the display enclosure.
13. If it is necessary to replace the WWAN antennas and:
a. Remove the WWAN antennas cables (1) from the display enclosure. The antennas are
attached to the display enclosure with tape.
b. Remove the WWAN antennas (2) from the display enclosure. The antennas are attached to
the display enclosure with tape.
Component replacement procedures 91
To Next Page
Loading...
