HP EliteDesk 800 G4 SFF

Drives
For a list of available drives, see Computer major components on page 4.
Drive positions
Drive positions
1 3.5-inch secondary hard drive bay
2 3.5-inch primary hard drive bay
3 2.5-inch hard drive bay
4 9.5 mm slim optical drive bay
NOTE: The drive conguration on your computer may be dierent than the drive
conguration shown above.
Removing and installing drives
When installing drives, follow these guidelines:
●
The primary Serial ATA (SATA) hard drive must be connected to the dark-blue primary SATA connector on
the system board labeled SATA0.
●
Connect secondary hard drives and optical drives to one of the light-blue SATA connectors on the system
board labeled SATA1 and SATA2.
30 Chapter 4 Removal and replacement procedures