6. Disconnect the following cables from the system board:
IMPORTANT: Connected cables may vary depending on system conīguration.
(1) Black drive power connector (SATAPWR0)
(2) Hard drive connector (SATA0)
(3) Optical drive connector (SATA1)
(4) Speaker connector (SPKR)
(5) White power supply connector (PWR)
(6) White power supply connector (PWRCMD)
7. Remove the eight Torx T15 screws that secure the system board to the chassis.
62 Chapter 4 Removal and replacement procedures
To Next Page
Loading...
