Speakers
Description Spare part number
Speaker Kit (includes left and right speakers and cable) 774605-001
Before removing the speakers, follow these steps:
1. Turn off the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2. Disconnect the power from the computer by unplugging the power cord from the computer.
3. Disconnect all external devices from the computer.
4. Remove the top cover (see
Top cover on page 28).
5. Disconnect the battery.
Remove the speakers:
1. Disconnect the speaker cable from the system board (1).
2. Remove the cable from clips built into chassis (2).
3. Remove the two Phillips PM2.5×4.0 screws (3) that secure the speakers to the computer.
40 Chapter 5 Removal and replacement procedures for Authorized Service Provider parts
49 / 85 48 / 83 49 / 85
To Next Page
Loading...
