EasyManua.ls Logo

HP ENVY x360 15

HP ENVY x360 15
82 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
System board
NOTE: The system board spare part kit includes a processor and replacement thermal material.
Table 5-13 System board description and spare part number information
Description Spare part number
Equipped with an AMD Ryzen7-3700U 2.3-GHz (turbo up to 4.0-GHz) processor (2400-MHz FSB, 6-MB
L2/L3 cache, quad core, 25 W cTDP) and the Windows 10 operating system
L53875-601
Equipped with an AMD Ryzen5-3500U 2.1-GHz (turbo up to 3.7-GHz) processor (2400-MHz FSB, 6-MB
L2/L3 cache, quad core, 25 W cTDP) and the Windows 10 operating system
L53874-601
Equipped with an AMD Ryzen3-3300U 2.1-GHz (turbo up to 3.5-GHz) processor (2400-MHz FSB, 6-MB
L2/L3 cache, quad core, 25 W) and the Windows 10 operating system
L53873-601
Before removing the system board, follow these steps:
1. Shut down the computer. If you are unsure whether the computer is o or in Hibernation, turn
the computer on, and then shut it down through the operating system.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet, and then
unplugging the AC adapter from the computer.
4. Remove the bottom cover (see Bottom cover on page 25), and then remove the following components:
a. Battery (see Battery on page 26)
b. Solid-state drive (see Solid-state drive on page 28)
c. Fans (see Fans on page 40)
When replacing the system board, be sure to remove the memory module shield and memory module (see
Memory module on page 29) from the defective system board and install them on the replacement
system board.
Remove the system board:
1. Disconnect the following cables from the system board:
(1) WLAN antenna cables
NOTE: The #1/white WLAN antenna cable connects to the WLAN module "#1/Main" terminal. The #2/
black WLAN antenna cable connects to the WLAN module "#2/Aux" terminal.
(2) Webcam/microphone module ZIF connector cable
(3) Display panel ZIF connector cable
(4) Power button board ZIF connector cable
(5) Speaker cable
(6) Power connector cable
(7) Switch board ZIF connector cable
(8) Keyboard backlight ZIF connector cable
(9) Keyboard ZIF connector cable
Component replacement procedures 47

Table of Contents

Related product manuals