HP EVA P6000 - Configuring application servers; Multipathing; Installing Fibre Channel adapters

12. Click Browse to navigate to the controller software image file (created from the downloaded
.ISO image) (see “Required kits” (page 6)) and select the appropriate file (Table 9 (page
49)).
Table 9 Controller software
Select this file:For this array:
\HSV300\10001000\300_10001000.SSSEVA4400
\HSV400\10001000\400_10001000.SSSEVA6400
\HSV450\10001000\450_10001000.SSSEVA8400
13. Click Next Step to upload the appropriate controller software image file.
A second code load confirmation window opens.
Figure 19 Second code load confirmation window
Enter YES (all uppercase) and click Continue.
14. The Code Load Storage System — Page 5 window (Figure 20 (page 50)) opens. Read any
pre-update application notes before proceeding. Click Finish to proceed or Cancel to exit the
procedure.
Step 5. Upgrading the controller software 49