ENWW Using the Embedded Web Server 105
1. Run a supported Web browser.
2. Enter the IP address of the print server as the URL.
Figure 4.3 Entering the IP Address
3. If prompted with security alerts, click Yes to proceed.
For initial access, the embedded Web server uses standard
HTTP. However, it can be configured to appear as a secure site,
using an X.509-compliant certificate installed on the print
server for identification. When properly configured, encrypted
browser communications through HTTPS (secure HTTP) may
be used for secure access.
Although not recommended, you can use your Internet
Options menu to configure your browser to ignore security
warnings if the print server is configured to operate through
HTTPS. See Mgmt. Protocols
.
4. An embedded Web server page will be displayed, either the
Home page of the HP Jetdirect print server or a device page
served by the device.
To Next Page
Loading...
Need help?
General
